DIGITAL TENS – EM-6100

0

Out of stock

Description

DESCRIPTION:

  • The Premier TENS is a fully digital battery operated pulse generator that sends electrical impulses to the nerves and underlying muscle groups.
  • This unit is a TENS used for pain relief.
  • The device is provided with two controllable output channels, each independent of the other.
  • A pair of electrodes can be connected to each output channel.
  • The intensity level and settings are controlled by press buttons. 
     

 

 

MECHANISM

TECHICAL DESCRIPTION

01

Channel

Dual, isolated between channels

02

Pulse Amplitude

Adjustable, 0-110 mA peak into 500 ohm load each channel.

03

Wave Form

Asymmetrical Bi-Phasic Square Pulse

04

Voltage

0 to 55V (Load: 500 ohm)

05

Power source

One 9 Volt Battery.

06

Size

11.8cm(L) x 6 cm(W) x 3.1cm(H)

07

Weight

157 grams with battery.

08

Pulse Rate

Adjustable, from 2 to 150 Hz, 1 Hz/step

09

Pulse Width

Adjustable, from 50 to 300 microseconds, 10 µs/step

10

Mode

Five TENS Modes: B(Burst), N(Normal),M (Modulation Rate & Width),S1( Modulation Width), S2 (Modulation Width)

11

Burst Mode

Burst rate: Adjustable, 0.5 ~ 5Hz
Pulse width adjustable, 50~300 µs
Frequency fixed = 100 Hz

12

Normal Mode

The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value.

13

Modulation Mode

Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300µs) are fully adjustable.

14

S1 Mode

Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 40% less.
The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable.

15

S2 Mode

Pulse width is automatically varied in a cyclic pattern over a nominal 10 second period. Pulse width decreases over a period of 4 seconds from the initial setting to a value 70% less.
The narrower pulse width continues for 1 second. It then increases over a period of 4 seconds to its initial setting. The cycle is then repeated. Pulse rate and pulse width are fully adjustable.

16

Timer

Adjustable, from 5 to 60 minutes minutes and continue(C), 5 minutes each step.

17

Patient 
Compliance Meter

This unit can store 60 sets of operation records. Total recorded time is 999 hours.

18

Low Battery Indicator

A low battery indicator will show up when the battery is low.

19

Operating Condition

Temperature:0°-40°C
Relative Humidity: 30%~75%
Atmosphere Pressure : 700Hpa~1060Hpa

20

Remark

There may be up to a +/-10% tolerance of all parameters and +/-20% tolerance of output amplitude & voltage.

 

Reviews

There are no reviews yet.

Be the first to review “DIGITAL TENS – EM-6100”

Your email address will not be published. Required fields are marked *